Commonly know as strip lighting, NightScapes is the perfect lighting scheme under the awning, slide, or anywhere you want a fully programmable MULTICOLOR light show.
NightScapes™
Original price was: $179.00.$159.00Current price is: $159.00.
Introducing NightScapes by Cabin Bright. You asked we listened. We spent 6 months designing and testing a 16’ 5” IP67 weatherproof strip to our precise specifications. The result? An extremely bright, completely controllable LED strip. Easy installation with everything you need right in the package.
| Weight |
52 oz |
|---|---|
| Dimensions |
260 × 260 × 102 mm |
Out of stock
We use a 5-in-1 chip which means EACH LED contains RED, BLUE, GREEN, WARM WHITE, and COOL WHITE. Of course, with millions of combinations available, you can select any color you want!
Pick from many built-in memory programs to automatically make your lights change color, flash, strobe, or scroll through every color. The built-in speed control lets you speed up or slow down any of the memory programs. The light controller has a memory so when you turn it back on it will remember the last program or lighting scheme used. Please click on the video below to see a brief demo of the NightScapes features.
We are the leading company to produce a lighting strip that also has warm white and cool white or any color of white in-between.
COMPLETELY weatherproof – IP67 rated.
Included in the kit are:
• 5 Meters (16.4 feet) of 30 LED/meter 5 in 1 5050 LEDs that produce all the colors, warm white, and cool white.
• 15 feet of weatherproof connecting wire.
• 1 Power Controller which provides power to the lighting strip.
• Can be used on native 12 VDC or 120 VAC with a 120 AC to 12 VDC transformer.
• Draws only 3 amps on full brightness.
• Multi-Function 2.4GHz Remote AND 2 AAA batteries. (Remote control from as far as 75 feet away.)
• Well written instructions, if I do say so myself.
• Silicone cap to fit over cut end if needed.
• 1 tube of Permatex Flowable Silicone for sealing light strip on all sides.
FOR INSTALLATION INSTRUCTIONS CLICK HERE
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Related products
1141M SINGLE Contact OPPOSITE Pins NAV Bulb – VERY BRIGHT
REPLACES THIS BULB:
1141 / 1156 Single Contact Base
This SINGLE contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a single contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-30 VDC will allow for large voltage fluctuations as well as perform perfectly in a 24-volt environment. At .125 amps, or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale. 
31mm Festoon
Bulb pictures are not to scale. 
43mm Festoon
Bulb pictures are not to scale. 
12-inch X-Factor LED Fluorescent Tube Replacement
This is the END of the 12" tube you are replacing.
50% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 576 Lumens and draws .375 amps for a total of 1152 lumens and .75 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 12” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright® Exclusive! 
G4 / Bi-Pin Base 12 – 2835s LED VERY BRIGHT for 12 / 24 volt Ceiling Fixtures
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 - Bi-Pin, 12-2835 LEDs, 10-30 volts - .1 amps, 800 Lumens, 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White.
Use for Interior CEILING PUCK LIGHTS in YOUR BOAT or RV. G4 / Bi-Pin Base (Side Pin), 15-5730 LEDs, 10-30 volts AC/DC - .125 amps, 800+ Lumens, 3200K-Warm White, 4100K, or 5500K-Day White. This bulb is a Cabin Bright Exclusive! Bulb pictures are not to scale.
G4 / Bi-Pin BLUE and WHITE, Bulb for MARINE Use
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 3/6/-2835 Blue - White LEDs on the same bulb, 10-30 volts - .1 amps White / .06 Blue, Blue=50 Lumens, White=340 Lumens, Lumens 3200K-Warm White, or 4100K-Natural White. This Bulb is a Cabin Bright Exclusive!
G4 / Bi-Pin RED, WHITE, and BLUE Bulb for MARINE Use
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 4/6/3-2835 Red - White - Blue LED on the same bulb, 10-30 volts - .1 amps White / .06 Red / .07 Blue, Red=60 Lumens, White=340 Lumens, Blue=30 Lumens 3200K-Warm White, or 4100K-Natural White.
This Bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale. 
1157M Dual Contact Offset Pins – VERY BRIGHT – NAV Bulb
REPLACES THIS BULB:
BAY15D
Bulb pictures are not to scale.
Dual contact offset pin bulb fits in most Nav, Steaming, Anchor, and Masthead lights. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 9-20 VDC will allow for large voltage fluctuations. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights. Red and Green bulbs available for faded nav light lenses. 
Chari (verified owner) –
More colors than you can imagine
Great product!
Alan Duggan –
Fantastic lighting solution. Easy installation and for after-the-sale service, you can’t beat Joe @ Cabinbright. I had some questions before my Nightscapes installation and he quickly and thoroughly answered them, making for a much easier, pain-free installation. Now they just work – exactly as I had hoped. Excellent product – very well made with superb instructions.