FTR – 18 / 18-inch LED Fluorescent Tube Replacement
$39.00
REPLACES 18-inch TUBES!
20% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 768 Lumens and draws .5 amps for a total of 1536 Lumens and 1 amp for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement 20% BRIGHTER than your existing 2 tubes.
The FTR-18 IS NOT AS BRIGHT AS THE 18-X!
| Color Temperature | 4100K, 5500K |
|---|
Same design and build as the X-Factor LED Fluorescent Tube Replacements but fewer LEDs on each board so we can bring down the cost. Providing a more economical way for you to replace your fluorescent tubes in your power-hungry fixture!
THESE ARE NOT STRIP LIGHTS!
• Each Light Board replaces ONE of your 18-inch tubes!
• 2 Light Boards provide 1536 lumens – 20% brighter than your tubes.
• Operates on 9-16 volts DC.
• 2 Light Boards draw only 1 amp.
• Measures 3/16 inches thick, 3/4 inches high, and 15 inches long. Fits between your existing sockets.
• DIMMABLE!
There may be VERY minor color variations in the product you receive. This is an accurate representation of the X-Factor color temperatures we offer. This is NOT an indication of brightness. The actual product is MUCH brighter than this.
THIS DOES NOT REPRESENT BRIGHTNESS!
This LED fluorescent tube replacement was designed for a more economical approach to converting your fluorescent fixture to LED. It has fewer LEDs but is still brighter than the existing glass tubes you are replacing.
Download Installation Instructions here (pdf).
3 reviews for FTR – 18 / 18-inch LED Fluorescent Tube Replacement
Related products
1076M DUAL Contact OPPOSITE Pins NAV Bulb VERY BRIGHT
REPLACES THIS BULB:
1076 Dual Contact Base
This Dual Contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a DUAL contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-20 VDC will allow for large voltage fluctuations as well as perform perfectly in a 12-volt marine environment. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale.
1141M SINGLE Contact OPPOSITE Pins NAV Bulb – VERY BRIGHT
REPLACES THIS BULB:
1141 / 1156 Single Contact Base
This SINGLE contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a single contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-30 VDC will allow for large voltage fluctuations as well as perform perfectly in a 24-volt environment. At .125 amps, or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale.
31mm Festoon
43mm Festoon
18 inch X-Factor LED Fluorescent Tube Replacement
REPLACES 2 18-inch TUBES!
This is the END of the 18″ tube you are replacing.
40% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 960 lumens and draws .675 amps for a total of 1920 lumens and 1.25 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright Exclusive!
G4 / Bi-Pin Base 12 – 2835s LED VERY BRIGHT for 12 / 24 volt Ceiling Fixtures
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 - Bi-Pin, 12-2835 LEDs, 10-30 volts - .1 amps, 800 Lumens, 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White.
Use for Interior CEILING PUCK LIGHTS in YOUR BOAT or RV.
G4 / Bi-Pin Base (Side Pin), 15-5730 LEDs, 10-30 volts AC/DC - .125 amps, 800+ Lumens, 3200K-Warm White, 4100K, or 5500K-Day White.
This bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
G4 / Bi-Pin RED, WHITE, and BLUE Bulb for MARINE Use
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 4/6/3-2835 Red - White - Blue LED on the same bulb, 10-30 volts - .1 amps White / .06 Red / .07 Blue, Red=60 Lumens, White=340 Lumens, Blue=30 Lumens 3200K-Warm White, or 4100K-Natural White.
This Bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
NightScapes™
Introducing NightScapes by Cabin Bright. You asked we listened. We spent 6 months designing and testing a 16’ 5” IP67 weatherproof strip to our precise specifications. The result? An extremely bright, completely controllable LED strip. Easy installation with everything you need right in the package.
Sean (verified owner) –
Nice and bright.
Richard N. (verified owner) –
Richard N. (verified owner) –