44mm 12 LED Festoon for RV and 12v Marine
Price range: $12.00 through $13.00
REPLACES THIS BULB:
44mm Festoon
Bulb pictures are not to scale.
| Color Temperature | 3200K, 4100K, 5500K, BLUE, RED |
|---|
Perfect for refrigerator, closet, boat salons, and chart rooms. (See Joe’s Tips)
• Base: 44mm Festoon
• LEDs: 12-Euchips 1440 SMDs
• Volts: 9-16
• Amps: 0.16
• Lumens: 3200K and 4100K=300 | BLUE=140 | RED=100
• Dimensions: 44mm from tip to tip, 7mm wide, space between the ends is 25mm
• Color: 3200K-Warm White, 4100K-Neutral White, BLUE, RED
• DIMMABLE!
This base bulb fits in your 44mm Festoon socket.
Colors are for comparison only. Colors will vary with different monitors and settings.
THIS DOES NOT REPRESENT BRIGHTNESS.
Choose your preferred color temperature from the “Choose an Option” drop-down menu above.
The 3200K or 4100K is best used for refrigerator lighting. My preference is the 4100K because it’s a whiter light. The 3200K is a good closet light in the bedroom as it is a softer light but still 3 times brighter than your existing incandescent festoon. The RED and BLUE are traditionally used in marine environments. Lounges and salons are using the blue for relaxing and the red is used on the bridge and chart rooms for preserving night vision.
Related products
1141M SINGLE Contact OPPOSITE Pins NAV Bulb – VERY BRIGHT
REPLACES THIS BULB:
1141 / 1156 Single Contact Base
This SINGLE contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a single contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-30 VDC will allow for large voltage fluctuations as well as perform perfectly in a 24-volt environment. At .125 amps, or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale.
1141 / 5008 Single Contact Base
18 inch X-Factor LED Fluorescent Tube Replacement
REPLACES 2 18-inch TUBES!
This is the END of the 18″ tube you are replacing.
40% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 960 lumens and draws .675 amps for a total of 1920 lumens and 1.25 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright Exclusive!
FTR – 18 / 18-inch LED Fluorescent Tube Replacement
REPLACES 18-inch TUBES!
20% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 768 Lumens and draws .5 amps for a total of 1536 Lumens and 1 amp for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement 20% BRIGHTER than your existing 2 tubes.
The FTR-18 IS NOT AS BRIGHT AS THE 18-X!
FTR-12 / 12-inch LED Fluorescent Tube Replacement
REPLACES 12-inch TUBES!
25% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 460 Lumens and draws .25 amps for a total of 900 Lumens and .5 amps for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 12” LED Fluorescent Tube Replacement 25% BRIGHTER than your existing 2 tubes.
The FTR-12 IS NOT AS BRIGHT AS THE 12-X!
G4 / Bi-Pin RED and WHITE, Bulb for MARINE Use
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 3/6/-2835 Red - White LEDs on the same bulb, 10-30 volts - .1 amps White / .06 Red, Red=50 Lumens, White=340 Lumens, Lumens 3200K-Warm White, or 4100K-Natural White.
This Bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
Reviews
There are no reviews yet