Marine
Showing 1–28 of 36 results
1076M DUAL Contact OPPOSITE Pins NAV Bulb VERY BRIGHT
REPLACES THIS BULB:
1076 Dual Contact Base
This Dual Contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a DUAL contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-20 VDC will allow for large voltage fluctuations as well as perform perfectly in a 12-volt marine environment. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale.
1141M SINGLE Contact OPPOSITE Pins NAV Bulb – VERY BRIGHT
REPLACES THIS BULB:
1141 / 1156 Single Contact Base
This SINGLE contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a single contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-30 VDC will allow for large voltage fluctuations as well as perform perfectly in a 24-volt environment. At .125 amps, or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale.
1141 / 5008 Single Contact Base
31mm Festoon
43mm Festoon
18 inch X-Factor LED Fluorescent Tube Replacement
REPLACES 2 18-inch TUBES!
This is the END of the 18″ tube you are replacing.
40% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 960 lumens and draws .675 amps for a total of 1920 lumens and 1.25 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright Exclusive!
12-inch X-Factor LED Fluorescent Tube Replacement
REPLACES 2 12-inch TUBES!
This is the END of the 12" tube you are replacing.
50% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 576 Lumens and draws .375 amps for a total of 1152 lumens and .75 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 12” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright® Exclusive!
FTR – 18 / 18-inch LED Fluorescent Tube Replacement
REPLACES 18-inch TUBES!
20% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 768 Lumens and draws .5 amps for a total of 1536 Lumens and 1 amp for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement 20% BRIGHTER than your existing 2 tubes.
The FTR-18 IS NOT AS BRIGHT AS THE 18-X!
FTR-12 / 12-inch LED Fluorescent Tube Replacement
REPLACES 12-inch TUBES!
25% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 460 Lumens and draws .25 amps for a total of 900 Lumens and .5 amps for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 12” LED Fluorescent Tube Replacement 25% BRIGHTER than your existing 2 tubes.
The FTR-12 IS NOT AS BRIGHT AS THE 12-X!
G4 / Bi-Pin 9-5730 9-16 volt BACK PIN or HAND WIRED
G4 / Bi- Pin Base 9-2835s LED Bulb for 12 / 24 volt Ceiling Fixtures
G4 / Bi-Pin Base 12 – 2835s LED VERY BRIGHT for 12 / 24 volt Ceiling Fixtures
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 - Bi-Pin, 12-2835 LEDs, 10-30 volts - .1 amps, 800 Lumens, 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White.
Use for Interior CEILING PUCK LIGHTS in YOUR BOAT or RV.
G4 / Bi-Pin Base (Side Pin), 15-5730 LEDs, 10-30 volts AC/DC - .125 amps, 800+ Lumens, 3200K-Warm White, 4100K, or 5500K-Day White.
This bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
G4-9MRB Red or Blue
G4 / Bi-Pin RED and WHITE, Bulb for MARINE Use
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 3/6/-2835 Red - White LEDs on the same bulb, 10-30 volts - .1 amps White / .06 Red, Red=50 Lumens, White=340 Lumens, Lumens 3200K-Warm White, or 4100K-Natural White.
This Bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
G4 / Bi-Pin BLUE and WHITE, Bulb for MARINE Use
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 3/6/-2835 Blue - White LEDs on the same bulb, 10-30 volts - .1 amps White / .06 Blue, Blue=50 Lumens, White=340 Lumens, Lumens 3200K-Warm White, or 4100K-Natural White.
This Bulb is a Cabin Bright Exclusive!
G4 / Bi-Pin RED, WHITE, and BLUE Bulb for MARINE Use
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 / Bi-Pin Base, LEDs 4/6/3-2835 Red - White - Blue LED on the same bulb, 10-30 volts - .1 amps White / .06 Red / .07 Blue, Red=60 Lumens, White=340 Lumens, Blue=30 Lumens 3200K-Warm White, or 4100K-Natural White.
This Bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
G4 – Bi-Pin Base 15 Tower Style LED Bulb
1157M Dual Contact Offset Pins – VERY BRIGHT – NAV Bulb
REPLACES THIS BULB:
BAY15D
Bulb pictures are not to scale.
Dual contact offset pin bulb fits in most Nav, Steaming, Anchor, and Masthead lights. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 9-20 VDC will allow for large voltage fluctuations. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights. Red and Green bulbs available for faded nav light lenses.
