1076M DUAL Contact OPPOSITE Pins NAV Bulb VERY BRIGHT
$12.95
REPLACES THIS BULB:
1076 Dual Contact Base
This Dual Contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a DUAL contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens – TWICE the Lumen output of the incandescent bulb you are replacing. 10-20 VDC will allow for large voltage fluctuations as well as perform perfectly in a 12-volt marine environment. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale.
This LED bulb is designed to replace the incandescent bulb in your DUAL Contact OPPOSITE pin navigation, anchor, steaming, and mast light fixtures. Created from 30 high-brightness 5730 SMDs which generates more than 800 Lumens.
• Base: 1076 / BA15D
• LEDs: 30-5730s (High Brightness)
• Volts: 9-20
• Lumens: 800+
• Dimensions: 18mm Square, 23mm Long – NOT Including Base
• Color: 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White
• DIMMABLE!

Colors are for comparison only. Colors will vary with different monitors and settings.
THIS DOES NOT REPRESENT BRIGHTNESS.
3200K – Perfect for Nav lights because the warm white light output of this bulb enhances the green and red color of the lenses.
4100K – This neutral white bulb is good for steaming lights, nav lights (if you have thick red and green lenses), and anchor lights.
5500K – This day white bulb is perfect for bright stark white light output for superior visibility for steaming lights and anchor lights

Typical Anchor Light Fixtures
The diagram below illustrates the way this bulb is designed. The sleeve with the opposite pins conducts either the + OR the – . The contact on the bottom provides the + or – power to the bulb allowing your fixture socket to be wired without regard to polarity.


This bulb has been certified by the U. S. Coast Guard for 3 nautical miles.

This vessel has the 30-5730 LED bulb in its navigation and searchlight.
Submit your review | |
1 2 3 4 5 | |
Submit Cancel | |
2 reviews for 1076M DUAL Contact OPPOSITE Pins NAV Bulb VERY BRIGHT
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Related products
1076 DUAL Contact ROTATING HEAD BULB – 15 5730 LEDs
REPLACES THIS BULB:
1076 Dual Contact Base
Use for OVERHEAD CEILING LIGHTS, PORCH, and COMPARTMENTS.
1076 - BA15D Base, ROTATING Head 15-5730 LEDs, 10-30 volts AC/DC - .125 amps, 800+ Lumens, 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White.
This bulb is a Cabin Bright Exclusive!
Bulb pictures are not to scale.
1076 Dual Contact Base 18 LED Bulb
REPLACES THIS BULB:
1076 Dual Contact Base
1076 BA15D Base, 18-5050 LEDs, 12 volts - .15 amps, 250 Lumens, 3200K-Warm White or 5500K-Day White
Bulb pictures are not to scale.
1076 Dual Contact Base 24 LED Bulb
REPLACES THIS BULB:
1076 Dual Contact Base
1076 Dual Contact Base, 24-5050 LEDs, 9-16 volts - .2 amps, 320 Lumens, 3200K-Warm White or 5500K-Day White
Bulb pictures are not to scale.
1076 Dual Contact Base 30 LED Bulb
REPLACES THIS BULB:
1076 Dual Contact Base
1076 BA15D Base, 30-5050 LEDs, 9-16 volts - .3 amps, 415 Lumens, 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White
Bulb pictures are not to scale.
31mm 12 LED Festoon for Marine and RV
37mm 6 LED Festoon for Marine and RV
18 inch X-Factor LED Fluorescent Tube Replacement
REPLACES 2 18-inch TUBES!
This is the END of the 18″ tube you are replacing.
40% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 960 lumens and draws .675 amps for a total of 1920 lumens and 1.25 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright Exclusive!
FTR – 18 / 18-inch LED Fluorescent Tube Replacement
REPLACES 18-inch TUBES!
20% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 768 Lumens and draws .5 amps for a total of 1536 Lumens and 1 amp for a 2 tube fixture. Available in 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement 20% BRIGHTER than your existing 2 tubes.
The FTR-18 IS NOT AS BRIGHT AS THE 18-X!
G4-S Bi-Pin 12 / 24-volt LED Bulb
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
The single Epistar 0810 COB chip delivers a serious Luminosity PUNCH to light your world.
Bulb pictures are not to scale.
G4-9MRB Red or Blue
REPLACES THIS BULB:
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
This bulb is available in either RED or BLUE and side pin or back pin depending on the socket orientation of your fixture.
Bulb pictures are not to scale.
1076 / 1141 BA15D Dual or BA15S Single Contact – RED – LED for Night Vision, Chart Rooms, Astronomers
REPLACES EITHER of THESE BULBS:
1076 Dual Contact Base / 1141 Single Contact Base
PLEASE CHECK YOUR BASE BEFORE ORDERING!
1076 / BA15D Dual Contact Base of 1141 / SINGLE Contact Base
8 | 24 5050 LEDs, 12 volts - .125 | .06 amps, 250 | 100 Lumens, RED
Bulb pictures are not to scale.

Roger Van Vechten (verified owner) –
I purchased these bulbs as trial replacements for 9watt incandescent bulbs in navigation lights. These are so bright, the green & red lenses look “washed out”. I backed off to the “bright” LED Bulbs. I was surprised to find the bulb was not polarity sensitive.
Diane W. (verified owner) –
The part was exactly what I needed. Great Customer Service, Joe called about something else I was looking for to see if I had found it elsewhere! I highly recommend working with Joe at CabinBright.