18 inch X-Factor LED Fluorescent Tube Replacement
$59.00
REPLACES 2 18-inch TUBES!
This is the END of the 18″ tube you are replacing.
40% BRIGHTER Than Your Existing Tubes!
Each printed circuit light board provides 960 lumens and draws .675 amps for a total of 1920 lumens and 1.25 amps for a 2 tube fixture, 3200K (warm white), 4100K (natural white), or 5500K (day white) 18” LED Fluorescent Tube Replacement.
This bulb is a Cabin Bright Exclusive!
| Color Temperature | 3200K, 4100K, 5500K |
|---|
THESE ARE NOT STRIP LIGHTS!
• Each Light Board replaces ONE of your 18-inch tubes!
• 2 light boards provide 1920 lumens – 40% brighter than your tubes.
• Operates on 9-16 volts DC.2 Light Boards draw only 1.25 amps.
• Measures 3/16 inches thick, 3/4 inches high, and 15 inches long. Fits between your existing sockets.
• DIMMABLE!

There may be VERY minor color variations in the product you receive. This is an accurate representation of the X-Factor color temperatures we offer. This is NOT an indication of brightness. The actual product is MUCH brighter than this.
THIS DOES NOT REPRESENT BRIGHTNESS
This product was developed because some of our customers have a one-piece ballast cover/reflector. Because the power is fed to the END of each light board, it is easy to install in ANY compatible fixture WITHOUT removing the ballast cover or reflector. Just remove the tubes, install the light boards, and connect the wires to your coach power…DONE!
This innovative Cabin Bright exclusive is 1mm thick printed circuit board, not including the 2mm 3M industrial-strength sticky back pad. It is 3/4 of an inch high and 15 inches long, packing 120 1210 SMD on each Light Board. These LED’s deliver 960 Lumens EACH, rather than the 800 Lumens of a standard fluorescent tube. This Patent Pending Design delivers 40% MORE light than your original tubes when they were new.

This revolutionary new LED replacement easily fits in your 15-18” fluorescent fixture. Delivers 1920 lumens and draws only 1.25 amps for 2 Light Boards. The flexibility of this product allows you to place as many of the light boards that will fit in the fixture.
It is perfect for lighting large areas in salons, dining areas, and bedrooms. For use ANYWHERE you need more light without adding fixtures, especially in dark wood-paneled rooms.
Submit your review | |
1 2 3 4 5 | |
Submit Cancel | |
I have replaced every light bulb in my 2001 coach with cabin bright products. The change was easy. For most fixtures cabin bright offers a direct replacement so the change is as easy as replacing a bulb. The only complication was the replacement of the fluorescent tubes. With the CabinBright led strips and supplied instructions it took about 15 minutes per fixture and that included removing the fixture and cleaning each throughly so it looked like new when complete. I had one minor glitch, but a call to Joe at CabinBright cleared up my confusion right away.
I am now enjoying much less heat in the cabin during the summer and significantly less current draw so when we are boondocking it takes much less battery power which means longer stays without generator. My next effort is solar power so I don't need the generator at all except when the A/C runs.
Thanks to Cabin Bright I am now installing these fluorescent replacement LED's under the cabinets of my stick built house. I stopped by the CabinBright booth at the FMCA rally and Joe explained how he did it.
Thank you Cabin Bright I am now enjoying your products in my stick built house as well.
I replaced the 18 inch florescent light in the sleeper of my Kenworth when the electronic parts went out, after spending $40 on replacement tubes. This light works great! I HIGHLY recommend this product. If I knew how bright this light was, I would have replaced it when the truck was new. Installation was quick and easy.
14 reviews for 18 inch X-Factor LED Fluorescent Tube Replacement
| 5 star | 100 | 100% |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Related products
1076M DUAL Contact OPPOSITE Pins NAV Bulb VERY BRIGHT
REPLACES THIS BULB:
1076 Dual Contact Base
This Dual Contact opposite pin bulb fits in your Nav, Steaming, Anchor, and Masthead lights that have a DUAL contact on the bottom and the pins on the base opposite each other near the bottom of the base. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-20 VDC will allow for large voltage fluctuations as well as perform perfectly in a 12-volt marine environment. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights.
Bulb pictures are not to scale. 1076 BA15D Base 13-2835 LEDs HIGH BRIGHTNESS LED Bulb
REPLACES THIS BULB:
1076 BA15D Dual Contact Base
1076 BA15D Dual Contact Base, 13-5050 LEDs, 12 volts - .06 amps, 200 Lumens, 3200K-Warm White or 5500K-Day White
Bulb pictures are not to scale. 1141 / 5008 Base 13-2835 LEDs HIGH BRIGHTNESS LED Bulb
REPLACES EITHER of THESE BULBS:
1141 / 5008 Single Contact Base
1141 / 5008 Base, 13-5050 LEDs, 12 volts - .06 amps, 200 Lumens, 3200K-Warm White or 5500K-Day White
Bulb pictures are not to scale. 37mm 6 LED Festoon for Marine and RV
44mm 12 LED Festoon for RV and 12v Marine
FTR – 18 / 18-inch LED Fluorescent Tube Replacement
The FTR-18 IS NOT AS BRIGHT AS THE 18-X!
18 Inch VERY BRIGHT for ENGINE ROOMS
G4 / Bi-Pin Base 12 – 2835s LED VERY BRIGHT for 12 / 24 volt Ceiling Fixtures
JC10 or JC20 Halogen Bulb. VERY HOT. Draws 2 Amps
G4 - Bi-Pin, 12-2835 LEDs, 10-30 volts - .1 amps, 800 Lumens, 3200K-Warm White, 4100K-Neutral White, or 5500K-Day White.
Use for Interior CEILING PUCK LIGHTS in YOUR BOAT or RV. G4 / Bi-Pin Base (Side Pin), 15-5730 LEDs, 10-30 volts AC/DC - .125 amps, 800+ Lumens, 3200K-Warm White, 4100K, or 5500K-Day White. This bulb is a Cabin Bright Exclusive! Bulb pictures are not to scale.1157M Dual Contact Offset Pins – VERY BRIGHT – NAV Bulb
REPLACES THIS BULB:
BAY15D
Bulb pictures are not to scale.
Dual contact offset pin bulb fits in most Nav, Steaming, Anchor, and Masthead lights. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 9-20 VDC will allow for large voltage fluctuations. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, 4100K for general use in most light fixtures, and 5500K for Anchor, Steaming, and Masthead lights. Red and Green bulbs available for faded nav light lenses. SINGLE Contact Offset Pins AVIATION Wing Tip and Taillight NAV Bulb
REPLACES THIS BULB:
BAY15S Single Contact Offset Pin
Bulb Pictures not to scale.
SINGLE contact offset pin bulb fits in some Wing Tip Nav lights. 30-5730 LEDs provide 800+ Lumens - TWICE the Lumen output of the incandescent bulb you are replacing. 10-16 VDC will allow for large voltage fluctuations. At .125 amps or 1.5 watts, this bulb draws only 6% of the power of your existing incandescent bulb. Available in 3200K for Red/Green Nav Lights, Red and Green bulbs available for faded nav light lenses. Continuous NEON Style Linear Light -Dot Free
Sold by the foot
This is a flexible strip that has 504 very small LEDs per meter. It appears like a neon light. INDOOR USE ONLY!
NightScapes™
Introducing NightScapes by Cabin Bright. You asked we listened. We spent 6 months designing and testing a 16’ 5” IP67 weatherproof strip to our precise specifications. The result? An extremely bright, completely controllable LED strip. Easy installation with everything you need right in the package.

Terry Prichard –
A BRIGHT IDEA
I had 4 florescent fixtures in our motor coach which, to me, seemed dim and always flickered at startup and required warm up during cold weather. I replaced the florescent tubes with Cabin Bright products and have a bright, well lit lounge and kitchen now. I know that the battery drain during dry camping is greatly reduced and I am confident that I’ll never have to do anything to these lights again, ever.
The process is so easy that it only took me about 30 minutes to do all four fixtures.
This is a great product.
Rich Machado –
Thanks for the great product and service. I retrofitted all the fluorescent lamps (9 fixtures) in our Monaco coach with your LED X factor replacement strips and could not be happier. I followed the included directions and it was a breeze. No more flickering lamps. They are cleaner, brighter and all at the same intensity with less power usage. GOODBYE fluorescent tubes!
Rick (verified owner) –
We hadn’t realized how dull the original lights were until I tried one of these. What a difference! Instead of a dim and yellow light we now have a bright and useful light that is better for reading, crafts, or just getting around. We are going to replace the rest of the ceiling lights with these. Installation was easy. Dry camping en route will be easier now, too. And Joe has treated us well.
TW Williamson –
OUTSTANDING PRODUCT!
Bought this item to replace the dim fluorescent tubes in our RV bathroom. Boy, was I ever surprised!! Perfect lighting, when I expected less. I’m ordering 2 of the smaller 12 inch sets for over the kitchen sink and another one for over the kitchen counter. I also will use two of the 18″ X-Factor in each of our two 36″ lights in the living room that we use as our main light source.
Installation was a breeze. I can’t say enough good things when I find a product that lives up to it’s advertising this well!
Couldn’t be happier!
BOB (store manager) –
I have a 2003 Country Coach Motorhome and wanted to replace the 18″ Fluorescent Tube lights. So I talked to a friend who recommended I contact Joe Brignolo at CABIN BRIGHT. I e-mailed Joe and he called the very next day, he is interested in RVing and is very helpful in our RV lighting needs, he is the inventer of the X FACTOR LED PRINTED CIRCUIT LIGHT BOARD, for Fluorescent Tube Replacement, with 960 lumens, 1920 lumens when replacing in a 2 Fluorescent Tube fixture.
So why would I replace the 18″ Fluorescent with the X Factor brighter more pleasant looking Light Boards?
The fixture looks nicer with the LED lights, the lights are brighter and easy to install, just connect your 12vdc power and mount the LED board 3M backing to the fixture.
Fluorescent tubes expensive, don’t last as long as they use to, seams like there is always some that need replacing, problems getting rid of the old tubes, ballasts also don’t last costly to replace. You will be saving money in the not buying fluorescent tubes and ballasts and that will in a short period, more that pay for the cost of LED lighting. The best reason for going with the LED light boards is (happy wife happy life) my wife likes the LED’s much better, happy wife. Joe has many other 12vdc LED products at excellent pricing worth taking a look at Cabin Bright web site and you need any help you can count on Joe.
Joe (verified owner) –
Excellent product.
Our fluorescent ballast finally died, so we replaced it with two of these. I removed all if the fluorescent guts. The result is fantastic! Now I’m wondering about still other lighting upgrades to do.
Ziggy –
This is a excellent product, I converted the lites in the main living area, liked them so much I relpaced the rest in the motorhome. The light is brighter than the tubes, next to no power draw, and work in cool temperatures, no flicker or dim light on start up.
This is a very easy conversion to do. If anyone is wondering wether or not to up grade I would not hesitate in saying that you will be pleased with this product . I used the x-factor 5500k.
Dealing with Joe was a pleasure, and he stands behind his product.
Chari (verified owner) –
More light and way less energy
Glen Carr (verified owner) –
As always a great product !!!
Robert H. (verified owner) –
Great service and quick. Would recommend to anyone.
Paul (verified owner) –
Just what I needed!
Robert McVay (verified owner) –
Love it
Richard N. (verified owner) –
Richard N. (verified owner) –